Center of Innovation in Bratislava. Transformation of the courtyard

Project idea

الفكرة الأولى التي شكّلت المفهوم الرئيسي كانت إنشاء مساحة تجمّع كبيرة وترحيبية بما يكفي، ليس فقط لطلاب وأساتذة جامعة STU، بل أيضاً لشباب مدينة براتيسلافا. يرحّب تصميم الحرم الجامعي، بمبناه الزجاجي الكبير والأسطح الخضراء والسلالم المؤدية إليه، بكل زائر من خلال انفتاحه وشفافيته، ويجعلك ترغب في الوصول إلى أعلى المباني ورؤية الحرم الجامعي من منظور مختلف. تم الحصول على الشكل الأمثل للمبنى من خلال تحليل الكليات المحيطة بالموقع. سيلتقط المبنى الجديد أقصى قدر من الضوء الطبيعي، مع احترام معايير الإضاءة الطبيعية. وبناءً على ذلك، يتكوّن التصميم من 3 كتل تبعد عن بعضها 9 أمتار. تم تزجيج الواجهات للسماح بدخول أكبر قدر ممكن من الضوء إلى داخل المبنى. يندمج الحرم الجامعي المصمَّم بشكل متناسق ويُجمّل المنطقة المحاطة بكليات جامعة STU.

Project description

The designed campus of the Slovak Technical University in Bratislava is located in the centre of Bratislava, Stare Mesto sector, between Radlinského, Dobrovsheko and Namestie Svobody streets. Nearby, there are plenty of public buildings, some of them representing the heritage of the city. Thus, when developing the project, it is necessary to respect the area where the campus is located, at the same time, it has to be modern, functional and relevant. The given site has an area of ​​18500 m2. At the moment, in the place of construction there are: a chemical laboratory, parking lots and several garages used by the university. The area reserved for the new construction is surrounded by the faculties of the university. The social area was located on the ground floor of block B, surrounded by outdoor exhibition spaces. The outdoor exhibition area is placed between the blocks. Thus, the visitors will be able to see at any time the ongoing events both inside the building and outside of it. The workshop area was located on the ground floor, in block C. Because the laboratories do not require direct lighting, they were located in the most unfavorable place from this point of view. Next to the main entrance, in block A, are located the rooms of the entrance group (wardrobe, lobby, reception, security, etc.) and the cafe. It is "extended" on two levels, to serve visitors to the exhibition area and a media library. Respectively, in block A on the 1st and 2nd floor is the media library itself. Above the exhibition space is the presentation center, with an auditorium with a capacity of 260 people in the console. In block C, the rectory is located in the console in the northeast. The research center of STU is placed on the 2nd and 3rd floor of block C, with 3 auditoriums located at the ends of the block. The parking lots and technical rooms are located in the underground and semi-basement levels. The access to the underground car park is from the basement level (-7,200 mm), in the southern part of the building. At the ends of the blocks, there are located in the console the halls and the administrative offices of the rectory. Under the consoles there are secondary entrances in blocks, equipped with elevators for people with disabilities. The blocks are connected to each other by walkways and stairs. The green roof was chosen, in order to create as much open space for students and teachers as possible, accessible for spending free time together, creating a core of the STU community. This type of roof is ecological and aesthetic, which maintains an optimal thermal regime: cool in summer and better thermal insulation in winter, compared to other types of terraced roofs. Access to the roof is ensured by 2 stairs on block B and exits from the stairwell of each block. Slope crossings between blocks or between the levels of the same block on the roof can be lower than ½. In the western part of the site there is designed an amphitheater, with a pavilion opposite to it. Therefore, it will be possible to organize outdoor events here, and the pavilion will allow participants to have a shelter in case of rain. According to the requirements of the competition, we connected the newly designed building with the existing faculties through a walkway, which passes over the main entrance to the building. The first thing any visitor notices when entering the lobby of the new building is a corridor 12 meters wide and 54 meters long, equipped with work tables and sofas, so that students can rest or study during breaks and free time. To facilitate the orientation of visitors in the building, the floors are marked with different colors the access roads to multiple areas of the building, each area being assigned a separate color.

Technical information

اللون المستخدم للجدران الخارجية هو الأوكر، ويُطلى نظام البناء الخرساني المسلح على سطح الواجهة باللون الرمادي الداكن، وكذلك الجدران الموجودة تحت الكونسول. أما العوارض المعدنية فلا تُلوَّن. يمثل الهيكل الحامل تكاملاً بين الإنشاء المعدني والخرسانة المسلحة. الجزء الأوسط من المبنى مصنوع من الخرسانة المسلحة، والتي تُعدّ أقل تكلفةً وأسهل تركيباً مقارنةً بأنظمة الإنشاء المعدنية. يُستخدم نوعان من العوارض، أحدهما بمسافة بين الأعمدة تبلغ 6 أمتار، والآخر بمسافة 9 أمتار، ويقع في بيوت الدرج وبين الكتل. أما الكونسولات الموجودة عند نهايات الكتل فتُدعم بواسطة نظام من العوارض المعدنية المثبتة كدعامات. مصدر إلهام المشروع الذي يُعدّ نموذجاً جديراً بالاحتذاء هو فيلا ميديتيرانيه في مرسيليا، فرنسا، حيث تم بناء كونسول بأبعاد مماثلة للتصميم المقترح، مع المسافة ذاتها بين العناصر الحاملة الرئيسية (12 م) وطول كونسول مشابه. وقد استُلهمت تهيئة العوارض المعدنية وتقسيمها ومادة البناء النهائية لهذه الكونسولات من فيلا ميديتيرانيه.

Dragoș Pînzaru

Technical University of Moldova, Urbanism and Architecture Faculty

Moldova

Architektura

Projekt odovzdaný

14. 07. 2021

Tag

Architektura University Public spaces

Rada studentům

Center of Innovation in Bratislava. Transformation of the courtyard

Hello Dragos, hope you are doing well. First, I want to tell you that I really like how you manage to make the connections and shapes with clear volumes considering the light, the landscape and the view for the users in every space. Your composition looks smooth and clean. Following, I address some points that you can try to explore in your project: 1. Main Volumes. The shapes and textures you used seem correct for the project. You can try to add a second skin in precise spaces for light and ventilation management. Elements such as louvers can help you bring texture to the light entering the spaces as well as letting you the chance to open curtain wall closed spaces so the climate comfort in your project is reached with passive techniques. 2. Staircase and Ramp. This space looks really useful for general users of the landscape. You can try to unify the green ramp with the lateral stairs so the area feels as one and the user can have the chance of either rest in the grass or continue her or his path in the project. 3. Lights. You may try to apply more artificial lights so the project can maintain its life with darker conditions. Lights can also help you to emphasize the crystal volumes and even make them appear like they are floating depending on natural light conditions. As well as external lights, the internal lights will make the crystal volumes more important at night, where these shapes will be the ones that guide the project’s composition and mood. 4. Plaza and Landscape. The green roofs are an excellent idea to continue with the plaza no matter the level of the project you are in. You can try to include more landscape design and program activities in these areas, so the user has a full experience in every corner of your project. For the project´s theme, your proposal has great potential. The images you presented evidence your work and order in the design process. I would like to see more inner spaces as well. I hope my comments can help you in your design. Feel free of contacting me if there´s any doubt.
20.03.2026

Jose Carlo Bolaños

Kategorie

Copyright © 2026 INSPIRELI | All rights reserved. Use of this website signifies your agreement to the Terms of Use, Privacy Policy, and use of cookies.